3 bolts on tranny pan have stripped heads

[DWBOX2000]

The bolts are still in and heads still on, torx just not catching. Suggestions on how to get out?

I ended up just putting new fluid in and going home. I was 2 hours from home and didn’t have the parts or know how to handle.

Instructions should mention checking to see if those bolt can spin before draining fluid.
Thanks.

[Kboggs]

Those bolts are not torqued very tight, I think I had the same issue when I did my tip service, and what I did was took a dremel tool and carefully cut a slot in the head, and used a flat screwdriver to remove and replaced with new ones.