|
Need help with transmission cable install
Background;
Pulling into a parking place, I lost "connection" to tranny. The shifter seem to move around but tranny would not engage.
I had her towed home. Inspecting under the car, I found that the shifter cable was loose from the anchor point.
I procured the clips and the green shifter alignment tool.
The console is out and the shifter is held in place by the green tool.
The tranny ends are disconnected. I am not clear on how to ensure that the tranny is in nuetral.
Help please.
BTW, I am having doubts about my process. Maybe the root cause is hydraulics.
Help please with my process or diagnosis.
David
|
Threaded Mode
