After repairing my car the ABS and brake pad sensor lights are on, don't know why.

[Jasper7821]

I had a mishap with my car and it's all fixed, but now the ABS and pad wear dash lights are on. Looking for any suggestions on how to remedy it.
Before the incident the car had all new pads, rotors, and sensors and the brake system flushed. Everything was perfect.
I replaced the left rear hub carrier, axle and bunch of suspension parts. The speed sensor cable was fine, but the brake pad wear sensor wires were ripped out of the plug. I put in a new sensor. Also, the hub that I got had a little different looking wheel speed sensor and had a different kind of plug. Mine is a 2001 S 6 speed and the hub was from a 2002 S speed. I used my old speed sensor since it was fine and undamaged.

The ABS fuse is fine, just don't know what would cause both lights to now come on.
I've driven about 20 miles and in the last two days and lights still on.

It's strange that the pad sensor is new so why is the wear light on.