After repairing my car the ABS and brake pad sensor lights are on, don't know why.

[Stl-986]

Well, your car was in a wreck. Assuming isn't something I would do.

[Jasper7821]

Don’t know if this makes a difference, the first link is for the ABS speed sensor I had originally, and the 2nd link is the one that came with the used hub carrier that had a different plug and the sensor looked different.
Pelican says the the 2nd one can't guarantee it fits for my car. The only thing that tore was the brake pad sensor and replaced it with a new one. And the ABS speed sensor wasn’t damaged so I had to use mine since the one from the hub tue connector didn’t fit.
The hub carrier was the same part number, so not sure why the ABS and pad wear sensor are lit. Have to buy a durametric soon can get the codes.

https://www.pelicanparts.com/More_Info/99660640600.htm?pn=996-606-406-00-M14&SVSVSI=1048&fs=0

https://www.pelicanparts.com/More_Info/99660640702.htm?pn=996-606-407-02-M14&SVSVSI=1048&fs=0

Originally Posted by Stl-986

Well, your car was in a wreck. Assuming isn't something I would do.

[Jasper7821]

Also while testing the brakes, the left front is locking up, ABS is working on all the other tires. The left tire went up the curb as well but there was no damage that I could see except for the rim needed to be repaired and had to replace the tire. When I had it on the lift earlier, I looked at all 4 wheels and the ABS speed sensor and pad wear sensor wires and plugs all looked ok.
Still trying to figure it out.
Does the Duramatic tell you which wheel has an ABS fault? Still need to get one of them.