Quote:
Originally Posted by Bill Ladd
Good 986 people - I’ve got a 2000 S that had no cruise from factory. I’ve obtained a 3-stalk and have Pdwight building me what he tells me will be his last cruise harness (parts hard to find now).
Issue is, my gauges have no cruise indicator light. Is this going to crush my dreams of cruise control?
TIA, Bill
|
I have done this very thing on my 2000 S.
You are going to have to run one of the wires from the new harness to the instrument panel. This wire powers the cruise control indicator bulb when cruise is active.
So you will have to remove the instrument panel to get to the connector you need to run the wire to.
While you have it removed shine a light at the back of the instrument panel.
you should see the cruise control icon at the far right side of the panel.
Put the correct bulb in hole (if absent). light should be good to go
Threaded Mode
