thrust arm bushings

[steved0x]

Probably front has holes and options for adjusting castor while rear has a single hole in center. They are the same otherwise.

[The Radium King]

Originally Posted by steved0x

Probably front has holes and options for adjusting castor while rear has a single hole in center. They are the same otherwise.

ah, good catch. i'd assumed they were all adjustable, but if you re-read perhaps not. why would you not get adjustable caster option on the back - with 20mm shims on the back you could run 996 rears but would need to adjust caster to address.

https://www.tarett.com/items/986-987-981-718-products/986-987-981-718-suspension/986-987-981-718-monballs~bushings-/adjustable-thrust-arm-bushing-kit-tabka01-detail.htm

[steved0x]

Originally Posted by The Radium King

ah, good catch. i'd assumed they were all adjustable, but if you re-read perhaps not. why would you not get adjustable caster option on the back - with 20mm shims on the back you could run 996 rears but would need to adjust caster to address.

https://www.tarett.com/items/986-987-981-718-products/986-987-981-718-suspension/986-987-981-718-monballs~bushings-/adjustable-thrust-arm-bushing-kit-tabka01-detail.htm

Yeah I would only ever get the adjustable ones for greater possible re-use down the road