Boxster transmission mount upgrade

[Jessepa]

Hello!
I have read alot of forums amd discussions about transmission mounts and I think I'm going to go with rs mount. Rs mounts are little stiffer than the porsche original ones but not as stiff as semisolid or solid ones am I right?
https://www.design911.co.uk/mobile/#part;id=133853
Does anyone know are these mounts any good? They are really cheap compared to oem rs mounts.
Thanks for your help. I'm new in Porsche community and I just bought my first boxster 2.5L two weeks ago and that has been the best thing I have ever bought!

[P_Carfahrer]

I am looking to do the same as a few members have done so for the reasons you note.

The only problem is the kit you link is backordered with no firm restock date. I have tried to order it through about five different US sites who claim to have it and have been unsuccessful as yet. Maybe design911 actually has one in stock.

[steved0x]

Slightly more pricy, I've got the Wevo Semi-solid transmission mounts, I got them from Tarett, I like it and would do it again. I do have the OEM front engine mount though. At idle, it is like a little back massage, so there is a little vibration, but is not there when driving. One time the wire from my camera, that I have mounted on the roll bar, was touching just right and it buzzed like crazy when the car was at idle.

[edc]

You can poly fill the hydraulic side of the OE mount. I've had mounts like this for 3+ years. Stiffer again and you can fill around the stud the other side. This is a cheap way to do it. Function First charge a small fortune for this.