Oil count down timer

[Tyfromoahu]

How do you fully step by step cycle the key?
Mahalo,
Ty Kaneshiro

Originally Posted by steved0x

I've seen this before - in the Boxster, if you stall, you have to turn the key all (or at least some of) the way off before attempting a restart. If you try and start from the "on" position (where the key was when you stalled) it won't engage the starter.

It is probably in the manual somewhere but this caught me out when I spun at an autocross and stalled the car... I went to restart and nothing happened until I cycled the key

[maytag]

Originally Posted by Tyfromoahu

How do you fully step by step cycle the key?
Mahalo,
Ty Kaneshiro

Don't overthink this, haha.
When you start the car, you turn the key clockwise to the "START" position. Then it rests in the "RUN" position.
If the motor stalls, the key is still in the "RUN" position, and must be "cycled" back, so turned counter-clockwise to "OFF" position before it can be turned clockwise to "START" again. This is what he means by "cycling the key".

[Tyfromoahu]

Oh thanks I guess im in such a panic I am not thinking straight thanks.

Mahalo,
Ty

Originally Posted by maytag

Don't overthink this, haha.
When you start the car, you turn the key clockwise to the "START" position. Then it rests in the "RUN" position.
If the motor stalls, the key is still in the "RUN" position, and must be "cycled" back, so turned counter-clockwise to "OFF" position before it can be turned clockwise to "START" again. This is what he means by "cycling the key".

[FoFoJoe]

The key cycling was new to me too the first time I stalled the car, I came from a Miata where I could just turn the key without removing it.

Nothing to worry about like others said with the oil timer, if you are unsure just check the oil the old fashioned way with the dipstick once a week or so.

[Tyfromoahu]

Originally Posted by maytag

Don't overthink this, haha.
When you start the car, you turn the key clockwise to the "START" position. Then it rests in the "RUN" position.
If the motor stalls, the key is still in the "RUN" position, and must be "cycled" back, so turned counter-clockwise to "OFF" position before it can be turned clockwise to "START" again. This is what he means by "cycling the key".

So it seems like I may have a wiring issue or something. When I went out to start it today the car didn’t start this is at about 5pm so not to cold for a cold start Hawaii is 81 degrees out. Anyway car didn’t want to crank but dash lights up. I tried again and it turned over. I’m pretty sure when I get in a “normal car” this doesn’t happen. Car runs but I’m just scared one day I’ll be out and aceedently stall the car and not be able to get it to turn over.
Do you have any suggestions?

Mahalo,
Ty Kaneshiro