Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 08-08-2018, 07:39 AM   #1
Registered User
 
Join Date: Jul 2018
Location: Scottsdale, AZ
Posts: 53
Quote:
Originally Posted by paulofto View Post
It sounds to me you have possibly one of 2 issues. Or maybe both. 1) The expansion valve might not be releasing enough refrigerant into the evaporator when at low RPM due to low pressure. 2) you are low on refrigerant.

The expansion valve can 'freeze' in a closed, open or partially open position. I'd get an A/C guy to look at it. The valve is about $30 CDN and refrigerant about $60 CDN. That is what it cost me to fix my similar issue a couple of years ago.

A far more expensive problem may be the compressor itself or the compressor clutch not operating properly.
Thanks! Is the expansion valve replacement something I can DIY without too many specialized tools? If I'm low on refrigerant, does that indicate a leak? I wonder if it would make sense to try one of those pressurized cans of refrigerant to see if that helps. Can that hurt? Thanks again!
ScottAZ is offline   Reply With Quote
Old 08-08-2018, 08:12 AM   #2
Registered User
 
Join Date: Jul 2017
Location: SoCal
Posts: 118
Hi, pls don’t use the freon refill from can. Just go to an AC shop and ask them to check the refrigerant pressure. Not expensive for adding some freon only.
ndfrigi is offline   Reply With Quote
Old 08-08-2018, 08:16 AM   #3
Registered User
 
Join Date: Jul 2018
Location: Scottsdale, AZ
Posts: 53
Quote:
Originally Posted by ndfrigi View Post
Hi, pls don’t use the freon refill from can. Just go to an AC shop and ask them to check the refrigerant pressure. Not expensive for adding some freon only.
OK, thanks. Do our cars use Freon? Not R134?
ScottAZ is offline   Reply With Quote
Old 08-08-2018, 08:18 AM   #4
2003 S, Arctic Silver, M6
 
paulofto's Avatar
 
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,346
Garage
Quote:
Originally Posted by ScottAZ View Post
Thanks! Is the expansion valve replacement something I can DIY without too many specialized tools? If I'm low on refrigerant, does that indicate a leak? I wonder if it would make sense to try one of those pressurized cans of refrigerant to see if that helps. Can that hurt? Thanks again!
Personally I'd go to the A/C guy for any repairs. The system needs to be drained to replace the valve and a vacuum needs to be drawn to refill it so somewhat special equipment is needed. They can test the system for leaks at the same time. They can also diagnose if it isn't the valve and something more serious.

When I had mine done the A/C shop did not have a valve for my car so I got one from ******************************** and the A/C shop only charged me labour and the cost of the refrigerant. Here is a link to the ******************************** part

https://www.********************************.com/en/catalog/porsche,2003,boxster,3.2l+h6,1417924,heat+&+air+conditioning,a/c+expansion+valve,6788

You could get a A/C refill kit and try charging the system yourself. If that fails then go to the A/C shop. I assume in Arizona A/C repairs are very common.

The place I got mine starts with 'roc' then 'kau' then 'to'


PS looks like I can't post the site where I bought one. Here is the part number . . . 996 573 929 01 expansion valve

Last edited by paulofto; 08-08-2018 at 08:22 AM.
paulofto is offline   Reply With Quote
Old 08-08-2018, 08:25 AM   #5
Registered User
 
Join Date: Jul 2018
Location: Scottsdale, AZ
Posts: 53
Quote:
Originally Posted by paulofto View Post
Personally I'd go to the A/C guy for any repairs. The system needs to be drained to replace the valve and a vacuum needs to be drawn to refill it so somewhat special equipment is needed. They can test the system for leaks at the same time. They can also diagnose if it isn't the valve and something more serious.

When I had mine done the A/C shop did not have a valve for my car so I got one from ******************************** and the A/C shop only charged me labour and the cost of the refrigerant. Here is a link to the ******************************** part

https://www.********************************.com/en/catalog/porsche,2003,boxster,3.2l+h6,1417924,heat+&+air+conditioning,a/c+expansion+valve,6788

You could get a A/C refill kit and try charging the system yourself. If that fails then go to the A/C shop. I assume in Arizona A/C repairs are very common.

The place I got mine starts with 'roc' then 'kau' then 'to'


PS looks like I can't post the site where I bought one. Here is the part number . . . 996 573 929 01 expansion valve
I guess the forum didn't like your links! It's OK, I can figure it out.

I can't seem to find an AC specialist and don't like the idea of taking it to one of the Porsche shops, as they seem to be pricier. Do you think something like this could be safely handled by a Jiffy Lube or Firestone type place? Thanks!
ScottAZ is offline   Reply With Quote
Old 08-08-2018, 09:07 AM   #6
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by ScottAZ View Post
I can't seem to find an AC specialist and don't like the idea of taking it to one of the Porsche shops, as they seem to be pricier. Do you think something like this could be safely handled by a Jiffy Lube or Firestone type place? Thanks!
Any place that services A/C systems can do it. There isn't anything unique about a Boxster A/C system.

With that being said, choose a service shop where you have confidence in the work being performed. Sometimes you do get what you pay for.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page