Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-22-2019, 04:40 PM   #1
Registered User
 
Join Date: Feb 2019
Location: ca
Posts: 3
Scheduled maintenance question for new Boxster owner

I am a new Porsche owner and have a 2015 Boxster (Base, automatic transmission), I bought it "certified" from a dealer with 19,000 miles and have had it for slightly less than a year. I have driven only 1,200 miles and had no problems whatsoever. I now notice the scheduled maintenance message. Given the limited usage, is this something I have to do per the recommended maintenance schedule? I do not expect to drive more than 5,000 miles this year. Thanks for your advice.

kashman is offline   Reply With Quote
Old 02-22-2019, 05:06 PM   #2
NewUserName
 
Join Date: Oct 2018
Location: Delaware
Posts: 101
I certainly would.
You have no idea when the oil was last changed, or if it was ever changed.
Every used car I ever bought I immediately changed the oil so I knew for certain what oil was in it and when it was changed.
Cheap enough insurance.
DoninDel is offline   Reply With Quote
Old 02-22-2019, 05:10 PM   #3
Registered User
 
Ciao's Avatar
 
Join Date: Dec 2015
Location: Denver
Posts: 866
Garage
What scheduled maintenance? With 19K miles it could be air filter, pollen filter, oil change, oil filter change, brake lines bled, etc.
__________________
5280 Cruising @High Altitude
Seal Gray & K&N Filter
Ciao is offline   Reply With Quote
Old 02-23-2019, 06:24 AM   #4
Registered User
 
Join Date: Jul 2017
Location: Tucson AZ
Posts: 536
I would religiously have the oil and filter changed once a year whether it needs it or not (it does.) There should be a maintenance record and schedule that came with the car, just go by that and don't put off any of the recommendations. A 2015, you paid a buttload for it, protect your investment. It'll pay off with better service from the car and protect the eventual resale value.

Welcome!
__________________
2001 Boxster
2007 Toyota Highlander
2003 New Beetle Convertible, Turbo, Tip 6 speed
Brian in Tucson is offline   Reply With Quote
Old 02-23-2019, 11:20 AM   #5
Registered User
 
Join Date: Aug 2005
Location: Sanford NC
Posts: 2,537
To maintain its certified status, you follow the schedule religiously. Doesn't mean you have to have a dealer do it but it does save hassles if something bad should happen and you need to assemble all your proof. You want that protection.

BTW, low miles per year isn't a good thing for a car. Frequent long runs with gradual warm up and then exercise it. Burn off the condensation in the crankcase.
mikefocke is offline   Reply With Quote
Old 02-27-2019, 07:46 PM   #6
Registered User
 
Join Date: Feb 2019
Location: ca
Posts: 3
Thanks for your input. I will follow your advice and schedule my service.
kashman is offline   Reply With Quote
Old 02-28-2019, 12:25 PM   #7
Registered User
 
Join Date: Feb 2019
Posts: 19
If you daily driving a 986, and given the oil being used in the Mobil 1 synthetic, would one change the oil every 5k?
Bcox is offline   Reply With Quote
Old 03-01-2019, 07:43 AM   #8
2003 S, Arctic Silver, M6
 
paulofto's Avatar
 
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,348
Garage
Quote:
Originally Posted by Bcox View Post
If you daily driving a 986, and given the oil being used in the Mobil 1 synthetic, would one change the oil every 5k?
I drive mine from April to October and change it once a year in the fall before it gets put into hibernation and usually is under 5000 KM (3000 M). If I drove it year round I would change it every 3,000 to 5,000 miles, or twice a year. Oil is the cheapest engine wear insurance you can buy. I do it myself and buy Mobil 1 0W40 when it goes on sale at Canadian Tire for ~$30.00 CDN (~$22.00 USD) for a 4.4 Litre jug. I buy my filters on line. Total cost comes to ~$75.00 CDN (~$55.00 USD). Oil and Filter change on a Boxster is an easy DIY all you need is a floor jack, 2 jack stands and a torque wrench with appropriate sockets.

paulofto is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page