986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 3 of 3 1 2 3
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Spacers... (http://986forum.com/forums/showthread.php?t=72328)

ymkmkrz 06-12-2018 01:32 PM
Quote:
Originally Posted by tonythetiger (Post 571450)
Team,

What are the widest spacers I can put on a stock 986 S without rubbing. I was thinking 20mm front, 15 rear, but I want to use stock bolts for the wheel and thought I'd ask who sells a complete kit. Advice on width and sourcing would be appreciated.

I have the 18" wheels.


I would not use regular spacers and longer bolts for 20mm or wider. You can get hub centric spacers that use your stock bolts with lugs and nuts to attach your wheels. They aren’t cheap, but shouldn’t wear out your wheel bearings so fast.


Sent from my iPhone using Tapatalk

Cunningr 06-12-2018 01:57 PM
Quote:
Originally Posted by ymkmkrz (Post 572781)
I would not use regular spacers and longer bolts for 20mm or wider. You can get hub centric spacers that use your stock bolts with lugs and nuts to attach your wheels. They aren’t cheap, but shouldn’t wear out your wheel bearings so fast.


Sent from my iPhone using Tapatalk
I believe porsche recommends using equal spacing front and rear. I could be incorrect though, just remember a thread with that mentioned.

Starter986 06-12-2018 04:19 PM
Quote:
Originally Posted by A8ked (Post 572319)
Read again carefully I said no rubbing.
No ****************, Dick Tracy. All this talk about rubbing, and you've got inches. I could fit 6 of my dicks in there.

My question was general in that you've a ****************ing grand canyon between your wheels and the lip. Who in their right ****************ing mind would not see that and still ask about rubbing? Or even mention the absence of it. Am I ****************ing missing something here?

Please read carefully? I read for a ****************ing living.**************** off.

You're from Seattle? I'm sorry. I'll try to speak slower next time.

Have a nice day.

A8ked 06-12-2018 04:48 PM
Yes, you are missing something, I was simply responding to the question from "ShortRound " as to if there was any rubbing. Perhaps you should be venting your frustration to "ShortRound" he asked the question.
Sorry, I did not intend to question your intelligence or manhood.

Starter986 06-12-2018 05:01 PM
Quote:
Originally Posted by A8ked (Post 572803)
Yes, you are missing something, I was simply responding to the question from "ShortRound " as to if there was any rubbing. Perhaps you should be venting your frustration to "ShortRound" he asked the question.
Sorry, I did not intend to question your intelligence or manhood.
Thank you for pointing that out. Please accept my apology.

Yeah... Shortround. WTH. :rolleyes:

No apology necessary, thank you and, again, my apology for the comment.

Clearly I wasn't bragging about girth. Fitting in 6 dicks wouldn't be fitting, no pun intended, for a well endowed man. Maybe I should have said 1 dick. ;)

Cunningr 06-12-2018 08:48 PM
Quote:
Originally Posted by Starter986 (Post 572804)
Thank you for pointing that out. Please accept my apology.

Yeah... Shortround. WTH. :rolleyes:

No apology necessary, thank you and, again, my apology for the comment.

Clearly I wasn't bragging about girth. Fitting in 6 dicks wouldn't be fitting, no pun intended, for a well endowed man. Maybe I should have said 1 dick. ;)
Well A8 certainly has no dick room with the 20mm spacers in! Hahaha maybe a finger:D

ShortRound 06-13-2018 03:49 AM
<div style="width:100%;height:0;padding-bottom:76%;position:relative;"><iframe src="https://giphy.com/embed/fDO2Nk0ImzvvW" width="100%" height="100%" style="position:absolute" frameBorder="0" class="giphy-embed" allowFullScreen></iframe></div><p><a href="https://giphy.com/gifs/fDO2Nk0ImzvvW">via GIPHY</a></p>

Cunningr 06-13-2018 04:09 AM
Well have my 15mm spacers and lug bolts on hand now. Hopefully, get them installed Saturday.


All times are GMT -8. The time now is 04:16 PM.
Page 3 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website