Can someone tell me what's going on with this spoiler?

[flynavyj]

Actually I think I might have figured it out. Noticed that the bumper was different for the 97-02 vs the 03-04 cars. Another difference is the spoiler (it has a bend at the ends vs the 02 and previous that are straight across). Apparently more changed under the spoiler in 03 as well, namely the mounting points. The early models used rivets vs the later design which used clips.

From what I can tell, the spoiler cover (the pretty piece) basically blew off. LoL. So what's exposed is the lower portion of the spoiler cap. It also reads that the 97-02 had the plastic rivets, and the rivets returned for the 05+ installation.

Wonder if a 986 Cayman spoiler would fit on the 03-04 boxster boot? Hmmmm. Here's a picture of the cover and the mount that I found while digging through the net.

[Starter986]

Originally Posted by flynavyj

Actually I think I might have figured it out. Noticed that the bumper was different for the 97-02 vs the 03-04 cars. Another difference is the spoiler (it has a bend at the ends vs the 02 and previous that are straight across). Apparently more changed under the spoiler in 03 as well, namely the mounting points. The early models used rivets vs the later design which used clips.

From what I can tell, the spoiler cover (the pretty piece) basically blew off. LoL. So what's exposed is the lower portion of the spoiler cap. It also reads that the 97-02 had the plastic rivets, and the rivets returned for the 05+ installation.

Wonder if a 986 Cayman spoiler would fit on the 03-04 boxster boot? Hmmmm. Here's a picture of the cover and the mount that I found while digging through the net.

Do you have a larger picture?

[amagalla]

Originally Posted by flynavyj

Actually I think I might have figured it out. Noticed that the bumper was different for the 97-02 vs the 03-04 cars. Another difference is the spoiler (it has a bend at the ends vs the 02 and previous that are straight across). Apparently more changed under the spoiler in 03 as well, namely the mounting points. The early models used rivets vs the later design which used clips.

From what I can tell, the spoiler cover (the pretty piece) basically blew off. LoL. So what's exposed is the lower portion of the spoiler cap. It also reads that the 97-02 had the plastic rivets, and the rivets returned for the 05+ installation.

Wonder if a 986 Cayman spoiler would fit on the 03-04 boxster boot? Hmmmm. Here's a picture of the cover and the mount that I found while digging through the net.

You are exactly right. The beauty piece is missing. It wouldn't just get blown off. It has to be removed (with some effort I might add). Find out if the owner still has it and the driver side rollbar mesh (these can get blown out.

Tony

[flynavyj]

Car is at a “shady-ish” dealership here in town, so doubt they have either piece. Have priced both, and they’re not terribly expensive, if you can find that specific 03-04 spoiler.

What is amazing is that the dealership has complete maintenance records, so I may go look at the car anyway, it does look gorgeous.

Btw, can a Cayman spoiler be installed on the 03-04 cars?

[Porsche-Eh]

The trim is held on by 3 plastic rivets:
999.507.499.40 Expansion Rivet

They just push in those 3 holes you see on the front face. I'm guessing someone removed them to remove the spoiler and then bumper to get into the rear trunk via the emergency cable or the side trunk vents. Been there done that.