Spacers for 18" Carrera Lights

[dchutinaton]

I haven't tried yet to see if it lines up with the rotor fastener. If it does line up should I try to find an appropriate length bolt and fasten it to the rotor? Will using it make a significant enough difference in balance to cause vibrations?

If I recall correctly there are two rotor fasteners on my current 5mm spacers.

[husker boxster]

Doesn't everybody need extra hoes? (In case one is busy.)

[The Radium King]

Originally Posted by husker boxster

Doesn't everybody need extra hoes? (In case one is busy.)

my understanding is that four hoes is best. one is not enough, and two will fight. if you have three then two will gang up on the third, and not many folks can afford five, so four is appropriate.

[The Radium King]

Originally Posted by dchutinaton

I haven't tried yet to see if it lines up with the rotor fastener. If it does line up should I try to find an appropriate length bolt and fasten it to the rotor? Will using it make a significant enough difference in balance to cause vibrations?

If I recall correctly there are two rotor fasteners on my current 5mm spacers.

rotors have two fasteners as well. don't think balance is an issue. the fasteners are not a strength thing, they are just there to keep the openings aligned for the wheel bolts.