Here are a few videos showing how to remove and disassemble the seats.
https://www.youtube.com/watch?v=vpX4D693D1I
https://www.youtube.com/watch?v=YmGAspMqBRk
I don't think he shows how to take off the seat back adjustment switch, but it just pries off. There are a couple of small springs that hold it away from the plastic panel beneath the switch, so be careful you don't lose them. Here's a post that covers the same information: http://986forum.com/forums/diy-project-guides/50255-boxster-seat-disassembly-procedure-part-1-2-a.html
I would start diagnosing the problem by checking to see if the plastic switch had become misaligned with the underlying control. The part that actually connects to the circuit board is like a nipple and the black cover fits over it.
It it is not the switch, it may be the motor or the wiring. I have an extra seat back motor if you need one.
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 997 adaptive sports seats, Litronics, silver console
Last edited by KevinH1990; 09-26-2017 at 06:07 PM.
|
Threaded Mode
