Temperature Gauge - 986 Forum - The Community for Porsche Boxster & Cayman Owners

CJ_Boxster · 07-25-2006, 12:06 PM

Cant wait to try that out, Thanks alot for the info, is there a 2c 3c 4c 5c between 1c and 6c? if so what are they for?

Quote:

Originally Posted by MNBoxster

Hi,

Those owners with pre-'00 Cars (and maybe a few '00 models) can access actual coolant temp (in °C) through the diagnostic mode of the AC Central Display. To do this, Hold down the Recirculating and Air Up buttons for 5 sec. The + & - buttons will scroll through a list of 'C' codes. The Center Vent button switches between the 'C' code and the actual value. Press Auto to exit the Diagnostics mode. 'C' code - 1c = Oil Temp, 6c = Coolant Temp. Hope this helps...

Happy Motoring!... Jim'99

MNBoxster · 07-25-2006, 02:27 PM

Quote:

Originally Posted by CJ_Boxster

Cant wait to try that out, Thanks alot for the info, is there a 2c 3c 4c 5c between 1c and 6c? if so what are they for?

Hi,

There are 36 'C' codes available through the Climate Control Display (made by Audi) ranging from outside temp, sun sensor temp, true vehicle speed, various voltages to fans and the like to engine RPMs. Search the threads, I've listed them before - too numerous to keep posting...

Happy Motoring!... Jim'99

CJ_Boxster · 07-25-2006, 02:45 PM

OH MAN Ill search now for it, I did check out the 6c code and when my temp needle was settled between the 8 and 0, the digital read out was 93.....does that stand for 193?

MNBoxster · 07-25-2006, 04:29 PM

Quote:

Originally Posted by CJ_Boxster

OH MAN Ill search now for it, I did check out the 6c code and when my temp needle was settled between the 8 and 0, the digital read out was 93.....does that stand for 193?

Hi,

No, the Climate Control Diagnostic reads in °C only - A simple method to convert °C to °F is to double the °C and add 30, so 93°C = 216°F - (93°C * 2 = 186 + 30 = 216°F).

The basic thing about Coolant Temp is that you want to keep it liquid as this will carry away the most heat and the liquid Coolant will flow to all the surfaces within the water jackets, Steam, a gas will not. This is why Cooling Systems are pressurized, because Coolant will remain a liquid at temps higher than standard (STP) boiling point. Water boils at 212°F, with the 13psi cap it boils at 245-250°F, with 50% antifreeze it boils at 265°F and at 70% antifreeze it boils at 276°F.

But, remember, your Oil carries away 60% of all the heat the engine produces, this is just as important a temperature value as the coolant. That said, 216°F is a little on the high side (not fatally, but high) for normal conditions. Make sure both your fans are working (turn on AC) and that both radiators are free of debris (a common problem). No two cars are exactly the same, so some variation is normal.

The only reason Temp is important below 240°F is that some ECUs (DME in Porsche Parlance) will go into Closed Loop operation at a pre-set temp, I haven't reasearched how or at what temp the Boxster does this. Hope this helps...

Happy Motoring!... Jim'99

CJ_Boxster · 07-25-2006, 05:53 PM

ok i see, Well its hot as hell here, but the funny thing about my temp being 216 is that it reads that when the needle is barely touching the 0...ill try hosing down the radiators and maybe the radiator that someone here says is in the passenger side air vent.

07-25-2006, 09:59 PM

My car is running about 100 celsius, or 212 F. And I looked on the forums for the c codes, and heres a link. http://www.986forum.com/forums/showthread.php?t=4166&highlight=Climate+Control+Display

MNBoxster · 07-26-2006, 06:38 AM

Quote:

Originally Posted by CJ_Boxster

ok i see, Well its hot as hell here, but the funny thing about my temp being 216 is that it reads that when the needle is barely touching the 0...ill try hosing down the radiators and maybe the radiator that someone here says is in the passenger side air vent.

Hi,

No Radiator in Passenger Side vent! This is an opening for an exhaust/cooling fan - you do not want to be shooting water in ther indiscriminately...

Happy Motoring!... Jim'99

2kwiq · 07-25-2006, 10:47 PM

Quote:

Originally Posted by MNBoxster

Hi,

. That said, 216°F is a little on the high side (not fatally, but high) for normal conditions. Make sure both your fans are working (turn on AC) and that both radiators are free of debris (a common problem). No two cars are exactly the same, so some variation is normal.

just trying to ease your worries a little. jim mentioned a quick calculation for celsius to farenheit and probably just ran with that number.

but you are actually running under 200 degrees. Faranheit = (1.8*celsius +32) don't know if that is still high?

but coming from a bimmer, i am constantly worried about cooling systems so just wanted to mention that.

MNBoxster · 07-26-2006, 06:43 AM

Quote:

Originally Posted by 2kwiq

just trying to ease your worries a little. jim mentioned a quick calculation for celsius to farenheit and probably just ran with that number.

but you are actually running under 200 degrees. Faranheit = (1.8*celsius +32) don't know if that is still high?

but coming from a bimmer, i am constantly worried about cooling systems so just wanted to mention that.

Hi,

Yes, you are correct, I was using the quick-check method. Actual Temp is 199.4°F. Agree you method is exact, the other just a quik chek...

Happy Motoring!... Jim'99