Turn Signal / High beam Stalk

[Mig]

Thanks guys! Really good information.

I have the 3-stalk switch with cruise. I was able to find a new replacement one from RockAuto for about $150.

The 4-stalk one was quite a bit more so I decided to keep the spend on the low side since I've poured a lot of cash into this project already. I can always add the OBC stalk later if I choose - thanks for that piece of info.

I'll review the pelican article on replacing the assembly. I used one of their articles last night to replace the headlight switch. Those guys sure are a great resource for us DIY'ers as is this forum!

Will report back once I get it installed.

Thanks again.