Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-28-2016, 01:59 PM   #1
Registered User
 
GTA_G20's Avatar
 
Join Date: Jan 2008
Location: St Catherines, Ontario
Posts: 438
Please help adjust top and clam shell

So I haven't made an official thread yet but I got another one. 2004s. Part of my negotiation was the issue with the top. Owner claims he replaced it and if like the rest of the self repairs he's done. Has no F*cking clue as to what he was doing.

Anyways. Let's start with the clamshell. The passenger side of my clam sits about 3/8" lower than my rear quarter panel. Therefore when my top is down the drivers side is raised 3/8" above the quarter panel.
I checked Mike fockes page and he makes mention of a black plastic clip to squeeze. I don't have this on my car.

Secondly, my roof. 1) when top is down and I want to raise and close the roof. It binds against the roll bar and does not raise unless I push it off the roll bar. 2) the gap between the window frame and the front of the top is significant before and after its latched shut. I wouldn't go through a car wash tho driving I have no wind noise. 3) the middle of the roof on left and right sides above the windows is overlapped gaped or uneven. It's just out of adjustment. Can upload pics if needed
GTA_G20 is online now   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page