Convertible top will not operate

[markkatri]

I have replaced everything but the panel rocker switch and ebrake switch which i know is good because the cluster light comes on when brake is on. I know the motor works and will open and close the top because i hot wired it to test it. What am i missing? If anyone has any tips to help figure this out it would be much appreciated.

[Lapister]

Might there have been any binding when completed? Could it have blown a fuse?

[Sassmatt72]

Fuse or relay.

[Retroman1969]

My light would come on with the parking brake, but the switch was bad anyway. That's usually the most common culprit when the top suddenly stops working.

[Sassmatt72]

I never knew the light could work but signal not. Good info. Thx

[dghii]

Originally Posted by Retroman1969

My light would come on with the parking brake, but the switch was bad anyway. That's usually the most common culprit when the top suddenly stops working.

Absolutely correct! I bypassed my switch when it went bad and would not allow me to operate my top. The bypass allows you to open/close roof while in motion.

By parking brake light still works when I use the parking brake.