| 
			Well, generically speaking it's a "gasket," but technically it's an o-ring and you can inexpensively replace it separately.  It's by design not a matter of tighten tighter, as you just turn the cap until it hits the stop..
 While you're at it, replace the o-ring on the dipstick, too ... 'cause it's the same vacuum leak.
 
				__________________Kent Christensen
 Albuquerque
 2001 Boxster
 2007 GL320 CDI, 2010 CL550
 2 BMW motorcycles
 
				 Last edited by lkchris; 08-26-2015 at 02:16 PM.
 |