![]() |
Congrats on your retirement. I'm almost 4 years in and everyday is a good day!
|
Good to hear from you you. Glad to hear you and th beast are doing well.
|
Hey guys it's time for more power :D Haha at least I hope so , if anyone knows Jake he never sits still he's always trying to improve . Part of that process has been coming up with an in house tuner and software vs. outsourcing as he has done in the past . This in house tuning has been available only to engine buyers for maybe 6 months or so . If the planets line up I will be on the dyno sometime next week to see if we can tune some more power out of her .
The last time she was on the dyno was with out sourced tuning and a GHL muffler . As of today the tuning has not changed but I have removed the GHL and installed a Mille Miglia I purchased used . Nothing else has changed other than I have added miles to her . I'm hoping for maybe 10 extra horse and some torque but we may get less or we may get more :) This will basically be it for tuning changes , I do however have a factory S muffler that I have modified with bypass pipes via 911brick on this forum . At some point I'll swap mufflers , get her on the dyno and see what changes that muffler makes if any . Other than that I drive her like I stole her :cheers: |
So it's been 4 years and 7,000 miles later got a chance to get back to Jake's shop to do some fine tuning . I looked back at my old dyno charts and she made 277 hp and 245 lb. ft. of torque at the wheels when she was new . That was in the winter so cold crisp air . The only thing I have altered since then is I took off the GHL muffler and installed the stock S muffler with a home version of PSE bypass pipes . Jake has a new propriatory tuning system so I decided to try it . Yesterday the temps were in the mid 80's but not too humid so decent conditions .
Basically after about 15 pulls we had it dialed in , the AFR's from idle to 7K are perfect with max hp of 282.22 and torque of 252 ........... at the wheels ! The throttle response is even more crisp than it was which is hard to believe . Idle is rock steady , light throttle or heavy throttle she's as smooth as a turbine . Zero drivability issues it starts great cold or hot . One of the guys at the shop stated mine pulls as hard as some 4 litres he has driven . I know Jake is building some monster motors so mine is a pip squeek in comparison but I wouldn't trade mine for anything at the moment . Driving " the beast " in the mountains is just crazy I can power slide at will or keep her sedate and in control . I can't imagine how many of these Porsche could have sold if they rolled off the assembly line like this one . :cheers: |
:cheers: Glad to hear it was worth your time and money. Always a great feeling when things work out.
When my engine goes bang I’ll definitely be going bigger. |
"At the wheels"in original pull?
You stated that she made the first set of numbers at the wheels and then made a big point about the second set of numbers being at the wheels?
Did you make a typo and mean to say the first numbers were at the crank? Also, those first numbers are larger than the Porsche factory numbers. Are the first numbers after some mods? Thanks. |
I went typo crazy , all numbers posted are at the wheels as tested on a Dyno Jet .
|
Final clarification , all hp and torque numbers from 4 years ago and yesterday are after Jake built the engine . My guess is she's around 315 or so at the crank . But it's just numbers it's how it drives that is the most important . And she drives very well :D
|
Thanks!
Roger, that!
Soooo, the power increase was just from the tuning? Jake is awesome. He has helped me so much since I bought my 986 in 2015. I shipped my Box to him and he installed his "IMS Solution" and a list of other preventative work I requested. The car has been a dream. :cheers: |
Hello everyone hope all are doing well . Just giving the forum members a heads up that I will be putting my 986 S up for sale in the spring . I have put 10k on the engine she's barely broken in . Runs like a raped ape :D
|
How much will you be selling it for?
|
Quote:
|
Quote:
|
All times are GMT -8. The time now is 09:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website