Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-06-2015, 10:35 PM   #1
Beginner
 
Jamesp's Avatar
 
Join Date: Mar 2013
Location: Houston
Posts: 1,659
Garage
I removed mine recently.

disconnect the battery and let it sit 10 minutes so the airbag circuit is discharged

remove the torx screws holding the airbag from the back of the steering wheel

remove the wiring from the inside of the steering wheel

Mark the position of the steering wheel nut so you can tighten it back to its original position plus a little bit. Mark the steering wheel position to the steering shaft so you get the splines lined up. A sharpie works well for marking. Leave the shaft bolt on a couple of turns when pulling off the wheel so it doesn't hit you in the chest.

That was about it for me.
__________________
2003 S manual
Jamesp is offline   Reply With Quote
Old 02-07-2015, 04:27 AM   #2
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
Removing the torx bolts can be a pain if you don't have the right tool, but everything else is easy.
__________________
Woody
itsnotanova is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page