Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions
Register Garage FAQ Community Calendar

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-09-2014, 07:11 AM   #1
Registered User
 
Join Date: Mar 2011
Location: DeLand, FL
Posts: 48
These are the last comments I will make on this:


My primary reason for starting this thread was to try to keep the IMS failure issue front and center. I've seen quite a few scrapped engines over these failures and want to encourage everyone to address their cars while they have a good bearing, and not a bearing in the condition I found this one.



Saying that the owners of these cars should not have a choice about the repairs because they might try to sell them later without disclosing what was done, is the same as saying that body shops should not be allowed to fix cars after an accident because the owner might not disclose in the future.

The serial number of the bearing and the VIN of the car have been registered with LN. If the engine fails, well, we will have done our best to try to save it. Again, that's the best we could do on this one. Try to remember, this is America. You know, personal freedom and all that jazz.

Jake's statement that I am neither a "Preferred Installer" nor certified in the IMS Solution is correct, but I feel that he put it up to imply that I am somehow unqualified to do either. I was a preferred installer for four years, and decided a few months ago to let my subscription expire because I felt that my advertising dollars would be spent more efficiently locally. I removed myself from the list, not the other way around. As to whether I become an installer of the IMS Solution, I don't know what the future holds, but I'm not ruling it out.

I am, and will continue to be a huge supporter of LN Engineering and their products. I am a dealer for their products and plan to continue in that role.

I apologize for creating an unnecessary ******************** storm here. Running a car shop presents many and varied ethical gray areas. I work hard to stay on the correct side of the fence and will continue to do so.

If you haven't addressed your factory bearing, please do.

Last edited by Series9; 09-09-2014 at 07:16 AM.
Series9 is offline   Reply With Quote
Old 09-09-2014, 07:54 AM   #2
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Quote:
Originally Posted by Series9 View Post

I apologize for creating an unnecessary ******************** storm here. Running a car shop presents many and varied ethical gray areas. I work hard to stay on the correct side of the fence and will continue to do so.

If you haven't addressed your factory bearing, please do.
Actually I think thread has been very helpful. So no need to apologize.
Lurkers looking to buy a second hand Boxster, in my experience on this forum, have generally not been advised to be careful with Boxsters/Carreras that have had IMS swaps yet are being sold not long after or with few miles since the IMS upgrade. Typically, prospective buyers coming on this forum to ask if a particular car up for sale is a good value or not, have treated an IMS swap as an open and shut case of a selling point. This thread has pointed out that an IMS swap can indeed be a very good thing or a red flag to move on.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 09-09-2014, 12:00 PM   #3
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,675
Quote:
Originally Posted by Series9 View Post
I apologize for creating an unnecessary ******************** storm here.
A little controversy maybe but no where near a **** storm! That term is forever reserved for "that which will remain unmentioned".

And no, don't ask, because mentioning it will get us all in trouble with the Moderators.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 09-09-2014, 08:31 PM   #4
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Quote:
Jake's statement that I am neither a "Preferred Installer" nor certified in the IMS Solution is correct, but I feel that he put it up to imply that I am somehow unqualified to do either.
Trust that it was posted in exactly the manner it was intended. If I wanted to say more, it wouldn't have been implied, as you state in your quoted text above. It would have been stated in a forward, direct manner, just like everything else that I state.

You never have to wonder what I am thinking, I'll tell you. I'll tell anyone. Eyeball to eyeball, toe to toe, or here online.

I have an engine here right now that should not have been retrofitted. Luckily it was caught before any other damage was done. It still has to come all apart, see an ultrasonic cleansing and go back together with it.

That one was carried out by a dealer...........
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Old 09-11-2014, 09:12 AM   #5
Registered User
 
Join Date: Oct 2008
Location: sw ohio
Posts: 253
..........

Last edited by jotoole; 09-12-2014 at 05:19 AM. Reason: WOW!
jotoole is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page