Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-17-2014, 08:28 AM   #1
Rookie
 
Join Date: May 2014
Location: Portland Oregon
Posts: 215
Garage
Interesting thread. What does everyone use for right turns in motion? Ive been using 2nd, as its easier to rev match than 1st, but it always seems to leave me a little low in RPM. Sometimes as low as 1500 when the corner is complete, is this bad?
__________________
02 Seal Grey 5 Speed
TypeA is offline   Reply With Quote
Old 06-17-2014, 09:11 AM   #2
Registered User
 
Join Date: Apr 2012
Location: Ontario, Canada
Posts: 598
I always double-clutch downshifts into a corner - if you match the revs correctly, it puts little wear and tear on the clutch and even less on the transmission. It should add no additional wear and tear on the brakes because, as has already been pointed out, you are heel and toeing and are not using compression braking (the whole point of double-clutching is to equalize revs so that there IS no compression braking and there is less strain on the clutch/transmission than releasing the clutch with mis-matched revs). The fact is that a properly executed, rev-matched downshift put less not more wear and tear on the clutch, cv joints, engine/transmission mounts than any downshift without rev matching.

I do not down-shift into first gear for corners - it is much harder to match revs and, frankly, even at 1500 RPM's in second, the engine is still pulling quite strongly (peak torque on the 2.7 occurs at relatively low RPM's).

Rolling to stop in neutral? I have always believed that while moving, the car should always be in gear in case you need to take an evasive maneuver (such as moving forward a bit to avoid contact from a late braking, or sliding car from behind - believe me, I know from experience).

Is downshifting prior to a corner and double-clutching necessary? Of course not, but all racing drivers do it with manual transmissions as it enables you to be in the correct gear in order to apply power in the middle of a turn and on exit. When you enter the turn your downshifting is done and you can concentrate totally on steering and trailing throttle braking, if you so choose. Plus it sounds great and let's face it, that is one of the true joys of owning a Boxster!

Brad
southernstar is offline   Reply With Quote
Old 06-17-2014, 11:18 AM   #3
Registered User
 
Join Date: Apr 2008
Location: Southern New jersey
Posts: 1,054
I heel/toe for corners, generally not when stopping. I bought the car to have fun, and that's the way I drive it !

I virtually never downshift to 1st for a turn. It would have to be a slow turn, and it can be a bit abusive IMO.
stephen wilson is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page