Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-25-2014, 03:27 PM   #1
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
According to the experts (Flat 6 / JFPinPA), M96 engine cylinder head gaskets rarely - if ever - fail and if they did, they wouldn't usually weep oil externally, you would have intermix problems.

More plausible would be your cambox(s) may need re-sealing (can be done with engine in car but easier with it out) or if pre 2003 car the spark plug tube O rings have hardened and are leaking - an easy job that can be done in a couple of hours and less than $100 in parts.

First off I would clean the areas with degreaser and check for the source of the leakage yourself after a couple of hundred km.
I would also get a second opinion from a reputable Porsche shop.....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page