Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-17-2014, 10:09 AM   #1
Registered User
 
schnellman's Avatar
 
Join Date: Oct 2008
Location: Ohio
Posts: 868
I don't know your parking situation, so this may not be possible. But, if you can reach the car with an extension cord, you could use a cigarette lilghter plug battery maintainer/charger. An hour or two would give you the juice to open the frunk.
schnellman is offline   Reply With Quote
Old 01-17-2014, 12:22 PM   #2
Registered User
 
Join Date: May 2013
Location: Central Illinois
Posts: 403
Thanks for the helpful tips. Tried again leaving the key in the door. No difference.
Using thin wire with alligator clips to carry power from donor battery. Will that work, or do I need jumper cables?

Meanwhile, I've removed the fender splash shield/liner and looked up at the area near the back of the headlight, felt around the sheet metal next to that and am not seeing or feeling the pull ring.

Came back home to read the postings again to see if I missed something about the cable. Wondered if it had been pulled once before, would the ring come off?

Also now wondering if the cable has already been re-routed. I'll go back out to check the tow hook area when it warms up a little. Today is 15 degrees with wind, making it close to zero.
Xcellr8 is offline   Reply With Quote
Old 01-17-2014, 12:32 PM   #3
Registered User
 
Join Date: Dec 2013
Location: Chicago
Posts: 141
Instructions are to use Jumper Cables. I used Jumper Cables at it worked.

Put the key in and turn to unlock, that should turn off the alarm.

Quote:
Originally Posted by Xcellr8 View Post
Thanks for the helpful tips. Tried again leaving the key in the door. No difference.
Using thin wire with alligator clips to carry power from donor battery. Will that work, or do I need jumper cables?

Meanwhile, I've removed the fender splash shield/liner and looked up at the area near the back of the headlight, felt around the sheet metal next to that and am not seeing or feeling the pull ring.

Came back home to read the postings again to see if I missed something about the cable. Wondered if it had been pulled once before, would the ring come off?

Also now wondering if the cable has already been re-routed. I'll go back out to check the tow hook area when it warms up a little. Today is 15 degrees with wind, making it close to zero.
__________________
Black on Black 2001 Boxster Base
Clutch Masters Stage III Clutch
Luk Flywheel // IMS Retrofit // Rear Main Seal
alanqning is offline   Reply With Quote
Old 01-18-2014, 03:06 AM   #4
pjq
Registered User
 
Join Date: Dec 2010
Location: Eastern canada
Posts: 262
Here's what it looks like on a 2004. I had the bumper cover off to clean the rad's so,... take some pic's.


top view, look below right headlight and below headlight washer.


right front headlight view


re-routed wire
pjq is offline   Reply With Quote
Old 01-19-2014, 12:34 PM   #5
Registered User
 
Join Date: May 2013
Location: Central Illinois
Posts: 403
Very nice photos. They are much appreciated. Once I get the frunk open, this would be a great project.
Xcellr8 is offline   Reply With Quote
Old 01-19-2014, 02:56 PM   #6
Registered User
 
Join Date: Aug 2007
Location: New Jersey
Posts: 691
Quote:
Originally Posted by schnellman View Post
I don't know your parking situation, so this may not be possible. But, if you can reach the car with an extension cord, you could use a cigarette lilghter plug battery maintainer/charger. An hour or two would give you the juice to open the frunk.

THIS.


I've been where you are before, and this is the path.


Don't try to start the car through the cigarette lighter, if you do you will short the wires. Just put enough juice in to charge the battery enough to open the frunk.


/
__________________
SOLD - 2002 Boxster S - PSM, Litronics, De-ambered, Bird Bike Rack, Hardtop, RMS leak...
fatmike is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page