981 emblem on my 986

[Saxosim]

Hi All

I know this is an incredibly old post now but has anyone by any chance got a template available to fit the Porsche letters badge to my trunk lid with a curvature like the way the OP fitted them?

Thanks hopingly in advance

[Greggz]

Originally Posted by Saxosim

Hi All

I know this is an incredibly old post now but has anyone by any chance got a template available to fit the Porsche letters badge to my trunk lid with a curvature like the way the OP fitted them?

Thanks hopingly in advance

+1 old post anyone have the template??

[Lew]

Originally Posted by Greggz

+1 old post anyone have the template??

https://www.ebay.com/itm/PORSCHE-Emblem-Template-911-Cayenne-Carrera-Panamera-Macan-Template-Only/263687051057?hash=item3d64f91731:g:MbQAAOSw3h1ZRf3 ~

[Lew]

Anyone know where the Emblems came from?

[particlewave]

Originally Posted by Lew

https://www.ebay.com/itm/PORSCHE-Emblem-Template-911-Cayenne-Carrera-Panamera-Macan-Template-Only/263687051057?hash=item3d64f91731:g:MbQAAOSw3h1ZRf3 ~

That's a straight template for a Macan or Cayenne. Not sure how it will work for the curved Boxster rear end, but probably fine.

Originally Posted by Lew

Anyone know where the Emblems came from?

Mine was for a Cayenne, ordered from Suncoast, but that was 6 or 7 years ago.

[Lew]

Originally Posted by particlewave

That's a straight template for a Macan or Cayenne. Not sure how it will work for the curved Boxster rear end, but probably fine.




Mine was for a Cayenne, ordered from Suncoast, but that was 6 or 7 years ago.

My Letters were for the Panamera, and with the template that came with the letters I was able to get the curve to match the Boxster S emblem.

[particlewave]

Originally Posted by Saxosim

Hi All

I know this is an incredibly old post now but has anyone by any chance got a template available to fit the Porsche letters badge to my trunk lid with a curvature like the way the OP fitted them?

Thanks hopingly in advance

Originally Posted by Greggz

+1 old post anyone have the template??

I didn't use a template, but here are my measurements:

[Lew]

I decided to keep my Letters the same color of the Boxster S Emblem. Here is how it went. Got the Black Letters and Template in a few days from California. Once primed and painted with 4 coats of base which dries quickly. However I waited 15 minutes between coats. Much later I then applied 4 coats of clear. Once the letters dried overnight they were good to go. Once the letters were in place and the template still taped down, I used a small piece of 2500 wet sandpaper to color sand the face of the letters.

[Lew]

If anyone would like the template. Send me an email.....