noob needs bolts

[nefarious986]

Do you have a spacer or reason to need non stock length ?

If not, these will work for you ( http://www.ebay.com/itm/390644746518?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 ) .. all measurements are listed there and match stock.

[tomc88]

they are nice. you think these are the same (as I am in UK so these are from UK shop).
BTW I have Sports design wheels. I have no idea about spacers.
i took a bolt off front and rear. they are same length. that is 20mm of thread, and 60mm in length tip to tip.
They have big cone type shaped washer thingies built in
16 BLACK PORSCHE WHEEL BOLTS PLUS MCGARD BLACK LOCK SET 37MM | eBay

[steved0x]

ECS Tuning sells some, including extended length.

I got 4 new ones to replace my locking ones, and got them from Amazon

If you have measured your old ones, then you should get new ones the same size. ECS Tuning lists the lengths on the different ones they sell.

You could also paint them, there are a couple of threads on here where folks have used VHT Silver Caliper Paint to paint them and it looks really good. I have a can of the paint but haven't gotten around to it yet...

steve