Rattle when clutch is out, no rattle when clutch is pushed in

[Gelbster]

Wow ,that is an expensive shopping list[ I hope they are experts in this 6 speed 7/or the similar Audi 'box ? This is a very difficult unit to work on for the first time. Suggest you Search here nd in 996 Forums for Gearbox repair/rebuild. It is a task very few shops are qualified to tackle. A few of us have tried with some success but the task was very exacting for even experienced diy mechanics with deep pockets.
QUOTE=no1tmorrow;533248]Numbersix - I bought a Sach kit with the throw out bearing. Think it is bad out of the box?

Gelbster - My second gear would pop out and grind going into 2nd gear. Once they tore the transmission apart here are the parts they had me get.


999-917-546-00
Transmission Oil Man

996-302-942-00
Idler Gear 2ND

986-303-010-00
As Gearshift Rod

996-303-301-00
Spiral Clamping Pin

996-304-061-03
As Guiding Sleeve

996-304-611-00
Synchronizer Ring

996-304-613-20
Cone Ring

950-304-617-20
Synchronizer Ring

996-301-805-00
Shaft Sealing Ring[/QUOTE]

[no1tmorrow]

Originally Posted by Gelbster

Wow ,that is an expensive shopping list[ I hope they are experts in this 6 speed 7/or the similar Audi 'box ? This is a very difficult unit to work on for the first time. Suggest you Search here nd in 996 Forums for Gearbox repair/rebuild. It is a task very few shops are qualified to tackle. A few of us have tried with some success but the task was very exacting for even experienced diy mechanics with deep pockets.

I bought all the parts from sun set porsche parts for 1650.00ish(shipping is a little much)

[Gelbster]

Originally Posted by no1tmorrow

I bought all the parts from sun set porsche parts for 1650.00ish(shipping is a little much)

If you like free shipping , try RND Euro Parts. Good prices too.