Help no sound after trying AVIC install

[tiggerkick]

Originally Posted by ChrisZang

just to be sure, I understand completely right:
You're not getting any sound, no mater what audio source (AM/FM/CD/AUX) you've selected?

Correct, I've tried switching around and playing around. Still no sound. I took a look at the blue wire and it says "amp turn on" on it. I just don't see a "system remote control" wire on the avic harness to attach it to. I've tried connecting it to the red ACC and yellow Battery wire from the avic harness as well and still no sound. couldn't find anything on the avic411 forum either.
thanks

[wvboxst3r]

Originally Posted by tiggerkick

Correct, I've tried switching around and playing around. Still no sound. I took a look at the blue wire and it says "amp turn on" on it. I just don't see a "system remote control" wire on the avic harness to attach it to. I've tried connecting it to the red ACC and yellow Battery wire from the avic harness as well and still no sound. couldn't find anything on the avic411 forum either.
thanks

Hook it to the power antenna wire. It is switched.

[tiggerkick]

Originally Posted by wvboxst3r

Hook it to the power antenna wire. It is switched.

Is that that the blue antenna control wire? I've tried that too. I've made an appointment with an installer next week if all else fails.

[wvboxst3r]

Not sure what color wire should say on radio wiring diagram. You need to hook a switched power to the amp power wire.

I had to play wire wiring from original radio as the colors were not correct.