Polite "beep" for alarm being armed?

[socratic]

Originally Posted by deliriousga

I'm sure it can be done, it just depends on how much time you want to put into it. I've thought about getting a small chirping horn for this. You could run the signal wire for the lights through it so it churped twice when locking and once when unlocking in synch with the lights. I'd be afraid to mess with re-wiring the regular horn and wouldn't want to use the chirp that lets you know something's open.

Anybody done this?

That's clever. Yes, I guess I could do that.
Anyone know where I can access the signal wire?

[deliriousga]

Originally Posted by socratic

That's clever. Yes, I guess I could do that.
Anyone know where I can access the signal wire?

Use a cheap tester with a light on it. Connect to the wires going out of the back of the flashers, lock the doors and see if you get a current. If so, turn the hazard lights on and see if you still get the current. Trace it back until you find the wire that gives you a signal when the alarm is pressed but not when the hazards are on. That should be your signal feed. The problem is it's probably in the dash somewhere with the billion other wires.