Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-26-2012, 10:19 AM   #1
Registered User
 
Join Date: Apr 2012
Location: Ontario, Canada
Posts: 598
One can't expect the gearing on the Boxster to be the same as a Camry for several reasons:

1. The redline on the 2.7, at 7200, must be about 10% higher than the Camry.

2. While 5th gear is, in fact, overdrive, nevertheless the intention on the Boxster (as with any performance car) is to keep the gear ratio spacing closer - ie., 'close ratio', so as to provide more seemless and balanced acceleration through the gears. The Camry, on the other hand, is more concerned with acceptable performance but higher fuel economy numbers on the highway that will appeal to most buyers.

3. In addition, the advertised top speed is more important to many Porsche buyers than the advertised fuel economy numbers. Increased speed increases drag and to achieve higher speeds for a given car, it is critical to have your maximum horsepower on tap as you approach the potential maximum speed. Since peak horsepower on the engine in the Boxster is very high up in the rev range (and drops only marginally thereafter until redline), it has a higher top speed than if the car was turning only about 4800 RPMs at, say 135 MPH. Were that the case, it is likely that the car would not have enough horsepower on tap at 135 MPH to overcome the aerodynamic drag at that speed and higher speeds would likely be impossible.

4. The Boxster engine just sounds so sweet at higher RPM's!

Brad

Last edited by southernstar; 06-26-2012 at 10:20 AM. Reason: sp
southernstar is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page