Speedster Humps installing problems...Help!

[RandallNeighbour]

I need to find that edge stuff that I see in the pic above. Mine doesn't have it and it needs it.

Any idea where I can source it?

BTW, lots of hump pix of my car here: http://www.iwantaporsche.net/pixpage.htm

[nicecar]

i havent used the velcro in forever no problem any speed

[boxster6354]

Randall -

You might want to look at this on eBay, I will be picking this up in a couple of weeks to try on mine.

Black Edge Trim Seal for Car Doors Caravans Tractors Lids D001 per Foot | eBay

-Travis

Originally Posted by RandallNeighbour

I need to find that edge stuff that I see in the pic above. Mine doesn't have it and it needs it.

Any idea where I can source it?

BTW, lots of hump pix of my car here: http://www.iwantaporsche.net/pixpage.htm

[always porsche]

Originally Posted by boxster6354

Randall -

You might want to look at this on eBay, I will be picking this up in a couple of weeks to try on mine.

Black Edge Trim Seal for Car Doors Caravans Tractors Lids D001 per Foot | eBay

-Travis

Thought i would let people know that i use the edging in the link a lot at work. The edging is reinforced with steel or a very stiff plastic and therefore is hard to bend around corners and "Barbs" on the inside hold it in place and will mark the paint on the humps.
Any reputable rubber stockist (sellers of gaskets etc) will sell smooth, soft rubber
extrusions in many shapes and sizes and the soft rubber will not mark the paint on the deck lid.
Would hate to think you've scratched your paint work and i've said nothing

[boxster6354]

THANKS!!

I will keep looking (Glad I did not place order yet)

Originally Posted by always porsche

Thought i would let people know that i use the edging in the link a lot at work. The edging is reinforced with steel or a very stiff plastic and therefore is hard to bend around corners and "Barbs" on the inside hold it in place and will mark the paint on the humps.
Any reputable rubber stockist (sellers of gaskets etc) will sell smooth, soft rubber
extrusions in many shapes and sizes and the soft rubber will not mark the paint on the deck lid.
Would hate to think you've scratched your paint work and i've said nothing