Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-22-2010, 07:27 PM   #1
Registered User
 
litteng's Avatar
 
Join Date: Nov 2008
Location: S'toon SK. Canada
Posts: 122
Garage
add a spare to the 987

looking for some info, the 987 did not include a spare wheel and tire, and i pushed it out of my mind but i can't live like this with no backup.

from what i've been able to find there is a inflatable spare that is designated for the 987 but would a spare wheel and tire from a 986 also fit the space in the frunk for the 987?

if i recall, the 986 spare was a compact spare, has anyone every added one of these to their 987,

i intend to go the used route, no budget for factory new pricing.


okay time to go to bed see you all tomorrow...

__________________
claus

03-r1100s, 11-f800st, 09-987.2, Norton Commando
auf adlers fluegeln getragen
litteng is offline   Reply With Quote
Old 11-23-2010, 05:19 AM   #2
Registered User
 
Join Date: Jun 2007
Location: Gatineau, Qc
Posts: 285
If spare is such important to you, why don't you just get runflat? :P
vipola is offline   Reply With Quote
Old 11-24-2010, 05:09 AM   #3
Registered User
 
Join Date: Apr 2008
Location: Southern New jersey
Posts: 1,054
There was some good recommendations on Renntech.com , IIRC you can use a 911 spare also? From what I've heard, run-flats ride and perform poorly. The only disadvantage of adding a spare is obviously the loss of 1/2 your trunk space. I've just decided to add a tire plug/inflator kit. When I replace the tires, I'll add an aftermarket TPMS.

Last edited by stephen wilson; 11-24-2010 at 05:14 AM.
stephen wilson is offline   Reply With Quote
Old 11-24-2010, 01:59 PM   #4
Registered User
 
husker boxster's Avatar
 
Join Date: Sep 2006
Location: Omaha
Posts: 2,866
I agonized over this when I bought my 987. I've never owned a car that didn't have a spare and especially a $58K car. Then it hit me - it's been 30 yrs since I've had a flat tire / blowout. Doesn't mean I can't have one tomorrow, but tires are pretty good these days. I sleep just fine without having a spare.
__________________
GPRPCA Chief Driving Instructor
2008 Boxster S Limited Edition #005
2008 Cayman S Sport - Signal Green
1989 928 S4 5 spd - black
1987 928 S4 - Granite Green Metallic (Felsengrun)
husker boxster is offline   Reply With Quote
Old 11-24-2010, 05:38 PM   #5
Registered User
 
Beelzy's Avatar
 
Join Date: Dec 2008
Location: California
Posts: 228
I've had a blowout on my '04 986 and it was really nice to have the spare. The old
tire was shredded wheat, and it BARELY fit in the trunk!

When a tire goes on a P-car, Fix-A-Flat or an inflation device will not cut it.
Beelzy is offline   Reply With Quote
Old 11-24-2010, 05:56 PM   #6
Registered User
 
Join Date: Nov 2007
Location: Chicago suburbs
Posts: 1,675
Boy, can I second Beelzy's comments. I had a rear go at 60MPH with no place to turn off.; it shredded. Fix-A-Flat would not be of help, but luckily my spare would....had it had air or I had an inflater. Long story short, I made it to help and all is well, except the cost of a new tire that had only 2500 miles on it (pic is before cleaning!).

Been years since a flat had occurred on any of my cars, but I guess it happens...and it sucks when it yours.
Attached Images
 
__________________
JGM
2002 Boxster S
1973 911 Green FrankenMeanie
PCA DE Instructor circa '95
jmatta is offline   Reply With Quote
Old 11-24-2010, 05:57 PM   #7
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
If it will give you a piece of mind, look for a 986 spare tire kit for sale. However, be prepared to pay a lot. For one reason or another these kits seem to be a commodity and they command a high asking price . Ironically, I've long since taken mine out of the car. But ask me if I would sell it ?, and the answer would be no. Call it a false sense of security I guess .
__________________
Don't worry … I've got the microfilm.

Last edited by Johnny Danger; 11-24-2010 at 06:00 PM.
Johnny Danger is offline   Reply With Quote
Old 11-24-2010, 06:05 PM   #8
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
I stand corrected. Here's a great opportunity to grab a spare for cheap !


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110616096209#ht_500wt_1182
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 11-24-2010, 06:05 PM   #9
Track rat
 
Topless's Avatar
 
Join Date: Nov 2006
Location: Southern ID
Posts: 3,701
Garage
A 986 Spare will work fine. There should be a glut of these since every boxster spec race car was gutted. Check ebay. I usually run without a spare in the car but carry a fix a flat kit and 12v compressor. For sidewall blowouts I have AAA premium membership. Long trips I usually carry the compact spare and on track days I shoehorn a full size rear into the frunk. It fits fine if you just lean it back.
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor-Ret.
Topless is offline   Reply With Quote
Old 11-24-2010, 06:11 PM   #10
Registered User
 
Join Date: Apr 2008
Location: Southern New jersey
Posts: 1,054
That's why I feel a TPMS is essential, you have to catch a leak before it gets low enough to destroy the tire. Tires almost never just "blow out", unless you hit something big. They lose pressure, then overheat and blow out. I've plugged a dozen tires over the years (but not the Boxter yet!), and it's always been a screw or nail.
stephen wilson is offline   Reply With Quote
Old 11-25-2010, 06:47 AM   #11
Registered User
 
Join Date: Aug 2005
Location: Ohio
Posts: 380
Garage
I picked up a 986 spare for our 987 last year and carry it in the front when we take long trip or do DEs.

The OD is off relative to the other tires so this would be just a temp fix if a tire goes bad in an out of the way place.

I'd recommend the trunk inner shield to go with it --can't think of the name--that protects the trunk lid underside from damage from cargo hitting the inside of the trunk lid if you hit a bump.

It ran about $150 for the whole tire kit which included the tire/jack and tools.

Some may feel it's not needed but I like the idea of a little insurance if things go bad and you're in a spot far from help or even cellphone coverage.
__________________
2013 Boxster S
2006 Boxster--sold
1999 Boxster--sold
MikenOH is offline   Reply With Quote
Old 11-25-2010, 08:30 AM   #12
Registered User
 
Spinnaker's Avatar
 
Join Date: Dec 2007
Location: Seattle
Posts: 735
Spare

Someone posted a link to this site awhile back. They list a spare for $58.95
Some of the responses think they get their stuff from the used parts yards (dismantlers).
http://shop.wheelsrims.net/search.html?make=porsche&model=boxster&year=2000&part_type=
Spinnaker is offline   Reply With Quote
Old 01-15-2023, 08:55 AM   #13
Registered User
 
jim_hoyland's Avatar
 
Join Date: Nov 2006
Location: Sunset Beach, CA
Posts: 305
I just picked up a 986 spare for the 987. Is there a threaded hole in the front trunk to secure the spare ?
jim_hoyland is offline   Reply With Quote
Old 01-15-2023, 09:00 AM   #14
Registered User
 
Join Date: Nov 2006
Location: In the garage...
Posts: 1,702
Is not - but you can add on easily... just need to be very careful when drilling as the old jerrycan is right behind there.
__________________
"Cool Prius!"
- Nobody
Burg Boxster is offline   Reply With Quote
Old 01-15-2023, 04:58 PM   #15
Registered User
 
jim_hoyland's Avatar
 
Join Date: Nov 2006
Location: Sunset Beach, CA
Posts: 305
Quote:
Originally Posted by Burg Boxster View Post
Is not - but you can add on easily... just need to be very careful when drilling as the old jerrycan is right behind there.
Fuel tank I presume. Could be tricky……
jim_hoyland is offline   Reply With Quote
Old 01-16-2023, 02:03 AM   #16
Registered User
 
Join Date: Sep 2022
Location: Seattle area
Posts: 59
Seems like bending up a bracket with a nut welded on would be a good idea, if the base is wide enough it could be held on by 3m foam tape. Or a bolt facing outwards, held on by a nut and then using a large wingnut and a plate to hold the wheel in place?

Hasdrubal is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page