help needed trying to find out what's missing in a boxster

[joromanolov]

hi! I am wondering what is missing in the front compartment of a 2002 boxster?
i will circle in red on the picture and hopefully it wont be something major.
got the car for a great deal but it will take some work and parts.... another question is if the car slid over a curb and broke some of the substructure- subframe what are the chances that the transaxle is ok 3.2 6 speed? and another question? how much hp and torque can the 6 speed take. would a 350 chevy be too much if the set up is used in a light custom chassis approximately 900+ kg or around 2000 pd. finished car with 20x12 wheels?
there are a whole bunch of wires cut (where i marked with a small red circle)????

http://picasaweb.google.com/109554028299757793060/UntitledAlbum#5519487271032244802

thank you for your help

[insite]

it looks like they cut out the audio equipment. i bet the transaxle is ok. what would you put this in w/ 20" wheels?

not sure EXACTLY what this transaxle will take, but my guess is around 450HP / 400lb-ft of torque

[joromanolov]

Thanks man that helps me a lot now i am more confident to revive the car.
I have plans to build a second car 8-900 kg with 400-500 hp and a ton of torque... till then i will figure it out current plans are to develop a body front and rear that supposedly will bolt to existing frame structure of the boxster

that is my first car

http://www.youtube.com/watch?v=GzvOUy7gFhM

thanks again

[chaudanova]

Originally Posted by joromanolov

Thanks man that helps me a lot now i am more confident to revive the car.
I have plans to build a second car 8-900 kg with 400-500 hp and a ton of torque... till then i will figure it out current plans are to develop a body front and rear that supposedly will bolt to existing frame structure of the boxster

that is my first car

http://www.youtube.com/watch?v=GzvOUy7gFhM

thanks again

Re: Fiero... that's a WILD looking ride you got there!!