![]() |
Constant power to stereo
I have fitted a double DIN aftermarket DVD/GPS system.
The only problem is I have switched power which only comes on when the ignition is on. I do not know how to power the stereo direct from the battery. Every time I turn the car off, the radio presets disappera nd i have to re tune stations and reset my GPS. Can anyone advise how to get constant power to the stereo? Will this effect battery life? Thanks |
i don't know which model Boxster you have.
In my 2002 there is behind the center console a 4 prong outlet which has non-switched power, switched power and ground. This was originally there to connect mobile phones Do a little search on the forum and you should find pictures etc. |
+1 on using the phone connector. The constant +12v you need is lurking right there under the lower console.
|
If for some reason you don't have the phone connector, there's a pass-through between the cabin and the battery compartment in the footwell (it's on the driver's side on my left-drive car). It's easy to pull power directly from the battery, through the rubber grommet, and into the center console.
If you run a lead to the battery, remember to include an inline fuse as close to the battery as possible. |
There are also empty fuse slots for connections.
As Chris said, the phone cable has switched +12 VDC, unswitched +12, mute and ground. Just pull the carpeted panel by your right leg gently back and down to access. I bought a connector from Becker so I would not have to spice into the harness. While you are in there it is a good time to hardwire your radar detector and/or 12 VDC garage door opener. I just left the detector there and it works fine. Why constant power? It will run down the battery. |
All times are GMT -8. The time now is 11:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website