Quote:
|
Originally Posted by Steve Tinker
Apart from the belt slipping (which it shouldn't as the tensioner should be - er - tensioning), the rollers usually get noisy when worn, only shreaking when siezed. The next thing to look at is the starter. Lots of people report that the starter gives a short, loud and horrific shreak for about a second as the bendix engages. The fix is to remove the starter and clean off the crud.
That's assuming the neighbours cat isn't missing......
|
It is not the starter for sure, since it makes this noise after the engine starts. Sometimes it will squeel after running for a while. I know it's a tensioner or a idler, but which one is the question. I am going to run it for a while a see if it gets constant which will make it easier to pin point.
Boxter
Hybrid Mode
