986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   RUF front bumper 986 (http://986forum.com/forums/showthread.php?t=23701)

mts 02-16-2010 02:59 PM

RUF front bumper 986
 
Does anyone have one of these? If so, can you post some pictures of it? I am trying to find more than what is available on their website which is really limited.

schoir 02-16-2010 04:15 PM

Quote:

Originally Posted by mts
Does anyone have one of these? If so, can you post some pictures of it? I am trying to find more than what is available on their website which is really limited.


Here you go:

http://i47.tinypic.com/10394ps.jpg

http://i46.tinypic.com/25poaop.jpg

http://i46.tinypic.com/33z60c6.jpg

Regards, Maurice.

Johnny Danger 02-17-2010 07:26 AM

Quote:

Originally Posted by mts
Does anyone have one of these? If so, can you post some pictures of it? I am trying to find more than what is available on their website which is really limited.

Go back to the thread "lower?'. There is a photo of a silver 986 with a Ruf front bumper. Also, there is a member on this forum who has a red 986 with the Ruf bumper that you can see under the thread "Hamann Body Kit Project" as well. I have seen the Ruf bumper and side skirts in person, and they are very high quality. They are made from PURIM which is a material that is similar to polyurethane, and the fit and finish of these pieces is excellent. Also, MASHAW ( a California based company) offers a fiberglass "knock-off" of the Ruf bumper. That's maybe what is on that black boxster.

eightsandaces 02-17-2010 07:49 AM

I looked into the bumper cover before buying the GT3, at the time they wanted 1700,00. Sorry but that's too expensive for me even though I like the look..

mts 02-17-2010 07:52 AM

Quote:

Originally Posted by eightsandaces
I looked into the bumper cover before buying the GT3, at the time they wanted 1700,00. Sorry but that's too expensive for me even though I like the look..


That's a good point, I think they want $1800 for the RUF now and the OEM GT3 can be had for quite a bit less I think. Are you happy with your GT3?

Quickurt 02-17-2010 08:38 AM

But the RUF looks like a trick Boxster S and the GT3 looks like, well, a GT3.

eightsandaces 02-17-2010 09:33 AM

Quote:

Originally Posted by mts
That's a good point, I think they want $1800 for the RUF now and the OEM GT3 can be had for quite a bit less I think. Are you happy with your GT3?


I like the way the GT3 looks, my OEM cover had a spider web crack in it, my body guy said they usually don't hold when repaired so I decided to change things up as long as I was taking the entire front end apart to look for any hidden damage.

eightsandaces 02-17-2010 09:35 AM

Quote:

Originally Posted by Quickurt
But the RUF looks like a trick Boxster S and the GT3 looks like, well, a GT3.


Very true, no argument, circumstances have placed me at a point in life where 1,700 for a cover just isn't doable anymore. I'd rather put a new flywheel and performance clutch in.....

Johnny Danger 02-17-2010 09:37 AM

Compared to bumpers like Hamann, Techart, Gemballa ect..; the likes of which all costing 3k plus, the Ruf bumper at $1,800.00 is extremely reasonable. I agree with Quickurt, the Ruf is more of a signature piece. Also, keep in mind that the Ruf bumper was designed to be more aerodynamic and functional than the oem bumper, and not simply cosmetic upgrade as many bumpers are. Take a look at those aggressive air ducts that are designed to create additional down force and cooling.

tholyoak 02-17-2010 09:49 AM

The Ruf bumper comes with the necessary larger ducting to the rads and proper under body panels to seal it all up so the rads still function properly. That coupled with the money you will spend at the body shop getting other non-factory parts to fit properly make it worth the money in my opinion. Then again maybe I am just trying to justify spending the money on the bumper and side skirts I bought for my car.

-Todd

mts 02-17-2010 09:51 AM

The GT3 bumper is the other one I was considering besides the RUF one. I have a couple other considerations. First, I already have the Porsche Aero II side skirts which I have seen in combo with the GT3 bumper and it looks good, but haven't seen in combo with the RUF bumper. I think they would also look good with the RUF, but I'm not as certain. Second, I have one of the Special Edition cars that already has a bit of a unique front to it. I'm not 100% sure I want to remove it at all since it's a 550, but it's easily the area of the car I like the looks of the least.

Decisions......decisions....

Boxtaboy 02-17-2010 09:57 AM

The Aero II sideskirts will look just fine with the Ruf bumper. Here's a shot of my pal Steve's ride, which has those items...

http://lh5.ggpht.com/_mwUQczg8WEU/S1...0/IMG_0079.JPG

mts 02-17-2010 09:57 AM

Quote:

Originally Posted by tholyoak
The Ruf bumper comes with the necessary larger ducting to the rads and proper under body panels to seal it all up so the rads still function properly. That coupled with the money you will spend at the body shop getting other non-factory parts to fit properly make it worth the money in my opinion. Then again maybe I am just trying to justify spending the money on the bumper and side skirts I bought for my car.

-Todd

Todd do you have a few more pics of your car you can post? It's gorgeous from the front end.

eightsandaces 02-17-2010 10:06 AM

FYI regarding choices GT3 bumper was a factory part with a factory number, it fits like a glove.

mts 02-17-2010 10:14 AM

Quote:

Originally Posted by eightsandaces
I looked into the bumper cover before buying the GT3, at the time they wanted 1700,00. Sorry but that's too expensive for me even though I like the look..

Do you have any pics of your GT3 you can post?

eightsandaces 02-17-2010 10:22 AM

Quote:

Originally Posted by mts
Do you have any pics of your GT3 you can post?


Not at work but I might have something on my home puter, I can never figure out how you guys blackout the plate numbers. I have had unwanted friends on the net, so I try to avoid any shots with the digits...

Johnny Danger 02-17-2010 11:45 AM

Quote:

Originally Posted by Boxtaboy
The Aero II sideskirts will look just fine with the Ruf bumper. Here's a shot of my pal Steve's ride, which has those items...

http://lh5.ggpht.com/_mwUQczg8WEU/S1...0/IMG_0079.JPG

I like the wheels. What brand are they ?

Quickurt 02-17-2010 11:55 AM

Quote:

Originally Posted by Johnny Danger
I like the wheels. What brand are they ?

Me, too, I'm PO'd, I missed them!! :(
It's in his siggy line - 18in SSR GT3 Wheels

Boxtaboy 02-17-2010 11:58 AM

The SSR GT3s are my wheels. The wheels on the red Boxster are Victor Racing Zehns...

http://www.vqmotoring.com/wheels/1401/Victor-Equipment-Wheels/Victor-Equipment-ZEHN-Matte-Black-.html

Johnny Danger 02-17-2010 11:59 AM

Quote:

Originally Posted by Quickurt
Me, too, I'm PO'd, I missed them!! :(
It's in his siggy line - 18in SSR GT3 Wheels

They look like a wheel that Victor offers.


All times are GMT -8. The time now is 01:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website