Desnorkle clarification - 986 Forum - The Community for Porsche Boxster & Cayman Owners

chitowndad · 06-02-2008, 06:01 PM

Guys,
I desnorkled my 2001 S and I didn't see any difference in the sound or performance. My S was already loud at 4K+ rpms. I wanted to make sure I did this right...

I pulled out the tube and removed the cup part of the snorkle and put it back. Is that desnorkling or is desnorkling the complete removal of the tube? I know this is a silly question, just wanted to see if I did it right.

BYW, I found that after removing the screw I could pull out the cover plate enough to slide a flat screw driver into the clamps and found that pushing them back worked a lot easier than pulling them forward per the instructions. I was careful not to scratch anything. Putting them back on was easy since they do just slide on from the front.

Any insight is appreciated!

-Steve

BoxsterLewis · 06-02-2008, 06:18 PM

Yes you have to remove the whole tubing with coupling at the end, and you should def notice a difference in sound and a lil performance. I did it in my 2001 S last week and I will never put it back unless engine blows under warrenty, its just the awesome sound you already had exemplified.

chitowndad · 06-02-2008, 06:21 PM

Thanks! I feel silly that I thought it was the cup that was the desnorkle process.

I'll yank it out this weekend!

-Steve

Jaxonalden · 06-02-2008, 06:49 PM

As I've said in a past post, if simply pulling the snorkel increases air volume and sound for that matter. Then why could you not pull the snorkel then trace the outline of the intake port, cut it out and now you have a snorkel as big as the intake port? And now, 'o so much air.

chitowndad · 06-02-2008, 07:03 PM

Ok, so I just removed the tube completely and took it for a drive. WOW! The sound that I get at 3K is what I'd normally get at 5K rpms. It even sounds a little deeper!

NICE!

I should have done this a year ago. I put a really small amount of oil on the tabs (put it on my finger then spread it on the tabs) and now the grill comes off really smoothly.

CJ_Boxster · 06-03-2008, 12:56 AM

Quote:

Originally Posted by Jaxonalden

As I've said in a past post, if simply pulling the snorkel increases air volume and sound for that matter. Then why could you not pull the snorkel then trace the outline of the intake port, cut it out and now you have a snorkel as big as the intake port? And now, 'o so much air.

search it. I did that. Made a how to. Pictures and all. Not worth the effort cause without the tube in there, the sound echo's in that cavity with give it the growl we all know and love from desnorkling. Having the tube expanded to a larger even width leaves it quiet... Just barley better than snorkled.

RobZ · 07-13-2008, 07:22 PM

I desnorkled today. I could see a bit of improvement in power but not as much of a difference in sound. Pretty happy with the 5 minute (and free) mod.