Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-12-2007, 12:54 PM   #1
Registered User
 
Join Date: May 2007
Location: Denmark
Posts: 71
Thumbs down OHH NO :( I damaged my car - fixing advice needed - please help!

I hate myself right now... once you have tried actually damaging you beloved car totally unprovoked you will know real pain and self-hate

I was parked outside a theater after a 3 hour show... it was completely DARK when I got in the car, turned the car on on a though I could pass straight from one parking booth to another and get out faster. I even asked my girlfriend, do you think I can pass through here.

I drove 40 cm... then I heard a sound that made my stomach turn over !!

I got out the car and I realized there was a stone so small you couldn't see it from within the car, but big enough to make considerable paint damage to my car.

I have searched for answers to this but I have some specific questions and I really hope you can help.

The damage is only in the paint. There is no misshaping at all. It is in the front bumper in the lower 6-8 cm far right side - within a area of 10 (height) x 25 (width) between the right air intake to the wheen. It is about 6-7 places where shells of paint have fallen off - these are 1-2mm thick - I doesnt look very good I tell you that !! It is a 98' Boxster in regular black. Paint is not faded imho.


My questions are the following:


1. Should I give the car to someone who knows how to take good care of it ? I feel like a moron !!

2. What type of repair is this (grinding, grounding and painting ?) ? Should I go to a porsche dealer or can I contact a smaller (cheaper) auto painter company ?

3. Is the bumper in plastic'ish material or metal (I know stupid question but they will ask me that tomorrow when I make calls) ?

4. Can someone tell me the exact paint code / color of regular Porsche black ?

5. Can this be done in a way so it wont pop into your eyes ? Right now its actually not that obvious until you get close to it but if someone has had this repaired so it was 99% invisible that would be good news right now.

6. Price range or time estimate for such a repair job ?


Any help is much appreciated !
williamsF1 is offline   Reply With Quote
Old 12-12-2007, 12:59 PM   #2
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
post some pics man, and we can estimate better.

sorry to hear that
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 12-12-2007, 12:59 PM   #3
EE3racing
Guest
 
Posts: n/a
My two cents, black should be an easy color to spot repair, depending on the proximity to the side vent, any indentation in the chip should be easily removable by someone with the proper skills and equipment. access to the back of it will help a lot, however if it's near a crease sometimes the removal tools won't be enough. Finally, do not take it to a Porsche dealer, find out from those who know where a good quality bodyshop is in your area and get it evaluated, good luck.
  Reply With Quote
Old 12-12-2007, 01:17 PM   #4
Registered User
 
tboyer's Avatar
 
Join Date: Sep 2007
Location: Virginia
Posts: 256
Garage
Quote:
Originally Posted by williamsF1

4. Can someone tell me the exact paint code / color of regular Porsche black ?

Any help is much appreciated !
Your exact paint code is located on the white sticker underneath the front hood. Look at the line "Paint No"
__________________

'06 Cayman 'S' - Sold (Sport Chrono, PASM, TPMS, 19' CAS Wheels, NAV)
'06 Cayenne - Sold
'01 Boxster 'S' - Sold
'00 Boxster - Sold
tboyer is offline   Reply With Quote
Old 12-12-2007, 01:29 PM   #5
Registered User
 
Join Date: Sep 2006
Location: Florida
Posts: 327
Being black and the kinda outta the way location that its in you could probably sand it down yourself, get a can of dupli color from advance, spray it, sand it, spray it, and then spray clear on it. It'll still be noticable, but for $10 and an hour of your time it'll look pretty undectable to someone not looking for it. You should def. post a pic for us to give a better idea though. If you take it to a shop, i would say 400-500i (guessing...i just priced painting a new bumper for my car literally less than a week ago).
__________________
"You finally got that Nazi-go-cart you always wanted." -Peer

http://i40.tinypic.com/ei6sns.jpg
pompous is offline   Reply With Quote
Old 12-12-2007, 02:01 PM   #6
Registered User
 
Join Date: May 2007
Location: Denmark
Posts: 71
Thumbs up

Thanks everyone.... A lot of great help! Im a lot better prepared for tomorrow when I will start calling around to get a offer.

It sounds like black is a pretty good color to repair, however even though the 10$ price is good I would never ever risk repairing it myself never... I hope this can be done close to perfect!

Hmm... 500-600$ for that area is a bit more than I had in mind but it wouldn't be the first time the price was higher than I hoped

I will take a few snapshots tomorrow and hopefully soon some pics of a repaired car...

I would still like to know if it is a plastic or metal bumper ?

Would this take a pro more than a day to fix from he got the car ?

THANKS AGAIN !!
williamsF1 is offline   Reply With Quote
Old 12-12-2007, 02:07 PM   #7
Registered User
 
Join Date: Sep 2006
Location: Florida
Posts: 327
It is some kind of plastic bumper...definitely not metal. 5-6 hundred was an estimate for painting the entire bumper by the way.
__________________
"You finally got that Nazi-go-cart you always wanted." -Peer

http://i40.tinypic.com/ei6sns.jpg
pompous is offline   Reply With Quote
Old 12-14-2007, 02:10 AM   #8
Registered User
 
Join Date: May 2007
Location: Denmark
Posts: 71
I called around and now have a arragement with a bodyshop on Monday.
The prices was from 180 $ to 770 $ and some wanted me to wait until next year.

But I cannot find the sticker inside my front hood that has the paint code. I checked everywhere I think. Can someone help with the paint code for the boxster black ? I guess it is the same color for all black boxsters, at least from around 98'

That would be a big help !!
williamsF1 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page