Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions


Reply
 
LinkBack Thread Tools Display Modes
Old 11-29-2007, 10:23 AM   #1
Registered User
 
Join Date: Jun 2007
Location: Colchester, CT
Posts: 489
P0410 and P1411 Codes

Below is a copy from the PCA about these codes. Where are these parts located on the engine? I get this code once in a great while and only just arter a startup and the engine is still cold. Any insight?
Thanks
Chris

Quote:
The fault P0410 is for the Secondary Air injection cylinders 1-3. The fault P1411 is for the Secondary Air injection cylinders 4-6. For both of these faults to be on at the same time you would have to have a common denominator. The number one would be the change-over valve and or the electric controlled solenoid.. Make sure that all vacuum lines are also connected properly. Then one should check the air pump for proper operation with a System 2 Tester or the PIWIS tester. This would be done under the short test for secondary air injection or drive links. Usually the valve and solenoid should be changed at the same time do to their location for removal. I highly recommend that once the problem is thought to have been fixed run a short test on it to verify you have done such. This would apply to all OBD repairs.


Dragonwind is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page