986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Need part number or name help for a rubber isolated nut (http://986forum.com/forums/showthread.php?t=13230)

blue2000s 09-15-2007 04:49 PM

Need part number or name help for a rubber isolated nut
 
I just discovered that I need to replace the rubber isolated nuts under the right and left cowl panels. The panel is number 11 in the linked diagram.

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214626&chapter= ERQ6931&appSectionid=2600&groupid=2600&subgroupid= 2382&componentid=2869&make=29&model=Boxster&year=2 000&graphicID=6931205&callout=11&catalogid=2

There is a Torx head screw that holds these panels into the strut towers. The strut towers have a rubber plug with a nut embedded in them that these screws attach to. I need these rubber plugs with the nut.

I can't seem to find the part in the catalogs at all. Does anyone know the part number or name of these guys.

Thanks.

Burg Boxster 09-16-2007 05:22 AM

It's called a well-nut and you might be able to find replacement at a local hardware store. Most likely they'll only carry SAE not metric, but if you want to change out the screw too, you'll be golden or you might get lucky (if they carry metric).

Anyhow, it is:

999.500.092.00

same for both sides ;)

blue2000s 09-16-2007 08:20 AM

Thanks for the info.


All times are GMT -8. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website