Well I did it.
Took the hard top off.
Struggled but managed to take the soft top off too.
Aside from 3 13mm screws (each side) there are also two black phillips head screws you'll need to take off. On the 13mm i suggest a socked and for the phillips you'll need the shortest screwdriver.
So far managed to only post a small clip (but very high def wide screen).
Will work on the other one, where I rev it all the way.
Go to
www.speed12.com/movies.htm .
Good luck.
If there are any problems, let me know.
I'm going to sleep now..
Threaded Mode
