986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 6 1 2 3 4 Last »
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster and Cayman Parts for Sale or Wanted (http://986forum.com/forums/forumdisplay.php?f=9)
-   -   FS: Factory style DIY Sport muffler kit (http://986forum.com/forums/showthread.php?t=44060)

Bigsmoothlee 01-10-2014 12:15 PM
Id just weld them the old school way, with an acetylene torch and some old metal coat hangers:cheers:

Are you making any more of these?

seningen 01-10-2014 02:19 PM
Any performance gains?

j911brick 01-10-2014 03:17 PM
Quote:
Originally Posted by Bigsmoothlee (Post 380361)
Id just weld them the old school way, with an acetylene torch and some old metal coat hangers:cheers:

Are you making any more of these?
As needed. I have a couple sets to sell right now. Then if there is more demand I will make more.

j911brick 01-10-2014 03:18 PM
Quote:
Originally Posted by seningen (Post 380377)
Any performance gains?
None to speak of. Its pretty hard to improve on stock these days.

rfuerst911sc 01-18-2014 03:16 PM
How's the sound cruising on the highway at 70 mph or so ?

j911brick 01-18-2014 03:50 PM
Quote:
Originally Posted by rfuerst911sc (Post 381675)
How's the sound cruising on the highway at 70 mph or so ?
Its a little louder than stock, unless you step on the throttle. Then it gets proportionately louder. Its not obnoxious though and there is no drone. Have you check out my video?

http://youtu.be/F63zOELwPLc

rfuerst911sc 01-19-2014 03:36 AM
Quote:
Originally Posted by j911brick (Post 381682)
Its a little louder than stock, unless you step on the throttle. Then it gets proportionately louder. Its not obnoxious though and there is no drone. Have you check out my video?

PCA autocross Retama 19oct13run1 avi - YouTube
Yes I did but in that situation there is a lot of on/off throttle vs cruising that's why I asked. I will probably be purchasing from you but I have to actually get my car first ! :D Obviously you are doing this mod with the muffler removed from the car. Are there any potential fitment/clearance issues when doing this mod outside of the car ? Do you recommend tack the two tubes in place then loosely install the muffler to make sure everything is straight with no clearance issues ?

j911brick 01-19-2014 06:37 AM
Quote:
Originally Posted by rfuerst911sc (Post 381745)
Yes I did but in that situation there is a lot of on/off throttle vs cruising that's why I asked. I will probably be purchasing from you but I have to actually get my car first ! :D Obviously you are doing this mod with the muffler removed from the car. Are there any potential fitment/clearance issues when doing this mod outside of the car ? Do you recommend tack the two tubes in place then loosely install the muffler to make sure everything is straight with no clearance issues ?
The first set I made had fitment problem so I changed the design a little. WHen you install them just make sure you tuck then as close to the muffler as possible. Taking the muffler off is only a five minute job. Getting the bumper off is probably harder. You dont need to tack the parts in place. Just mark where the holes go. Then you will need trim the the pipes to fit. You will end up taking about an inch off each end.

j911brick 02-19-2014 08:36 PM
Monthly Bump

rfuerst911sc 03-15-2014 05:44 AM
PM sent on the pipes.

rfuerst911sc 03-29-2014 03:48 AM
James I sent payment on 3/21 did you receive ? I want to make sure payment isn't lost. Please advise. Thanks

j911brick 03-29-2014 05:15 AM
Quote:
Originally Posted by rfuerst911sc (Post 393260)
James I sent payment on 3/21 did you receive ? I want to make sure payment isn't lost. Please advise. Thanks
I'm at the track but I had not received it by the time I left.

james

rfuerst911sc 03-29-2014 07:28 AM
Quote:
Originally Posted by j911brick (Post 393265)
I'm at the track but I had not received it by the time I left.

james
Well that makes me nervous, please check when you get back from the track. Will that be tomorrow ? Thanks

j911brick 07-01-2014 07:03 PM
Been a while so time for a bump.

j911brick 02-18-2015 02:42 AM
Still have a couple available.

j911brick 07-02-2015 08:11 PM
Way over due for a bump.

EJ-Fresno 07-03-2015 11:27 AM
How much would it be for a non-S set?
Thanks.

j911brick 07-03-2015 05:24 PM
Quote:
Originally Posted by EJ-Fresno (Post 456047)
How much would it be for a non-S set?
Thanks.
Price is the same.

j911brick 11-10-2015 09:00 PM
bump again

j911brick 01-10-2016 06:09 AM
Only two sets left.


All times are GMT -8. The time now is 10:05 AM.
Page 2 of 6 1 2 3 4 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website