Quote:
|
Originally Posted by blinkwatt
Follow these steps and eliminate them one by one;
-Smoke test the intake
-Check your AOS for any leaks
-Clean your MAF w/ electrical contact cleaner
-Replace the AOS w/ 'j' tube ($105 or so from Sunset)
-At this point I would take it to an indie to have it checked out because the MAF is $240+ and o2 sensors are $480+,you don't want to waste money on the wrong part.
Good Luck!
|
If one were to perform the smoke test, where would be the best input source for the smoke? Last time a mechanic ran the smoke test, he pulled the vacum hose from the FPR but no smoke leaks detected anywhere.