986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

blinkwatt · 04-06-2007, 10:16 AM

Whoa! After looking at how to cable connects I noticed that passenger side cable rod housing near the engine compartment foam cover had complete unseated itself from the bolt that holds it in place.....how that happened I have no clue. When I found this the two parts were completely seperated,one holds the other in place=why I couldn't properly seat the cable w/o it popping off.

Now that I put everything back together the top goes up and down w/o popping and having the cable pop off as well. Thanks Jim for the input!

04-06-2007, 10:16 AM	#5
blinkwatt Registered User Join Date: Sep 2005 Location: Sacramento Posts: 3,417	Whoa! After looking at how to cable connects I noticed that passenger side cable rod housing near the engine compartment foam cover had complete unseated itself from the bolt that holds it in place.....how that happened I have no clue. When I found this the two parts were completely seperated,one holds the other in place=why I couldn't properly seat the cable w/o it popping off. Now that I put everything back together the top goes up and down w/o popping and having the cable pop off as well. Thanks Jim for the input! __________________ -99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway -01' S Orient Red Metallic 6-spd...money pit...sold to buy a house Last edited by blinkwatt; 04-06-2007 at 10:43 AM.