View Single Post
Old 12-20-2006, 05:19 PM   #30
Grizzly
Registered User
 
Join Date: May 2006
Location: Annapolis Maryland
Posts: 1,528
Quote:
Originally Posted by wanna986
Hi again Grizzly,
How do you think it would fare against overspray (car paint) and what brand did you use? How much, price?
I did my last floor in 1995 with a Rustoleum product that I got at Home Depot. There are much better products out there now. I'd recommend either Epo-Armor, or U-Coat-It. They are different products and the prep and application processes are very different. You'll need to carefully evaluate both products to see what will work better for your application.

As far as overspray goes, it's not a big problem. It'll wipe up with a little thinner. Of course, you can't be stupid about it. Don't expect to paint a whole car with no floor protection and wipe off the excess. That's not going to happen. However, if you get a little overspray on the floor by accident, it'll come up.

As far as price goes, I've been back and forth recently with my multiple personalities regarding what I should do with my current floor. If I were to use U-Coat-It, it would run about $1200.00 for 1000 square feet. The Rustoleum I used 11 years ago was 300.00 for roughly 600 square feet.
__________________
http://i84.photobucket.com/albums/k2...izzlysmall.jpg
'97 986
Cheating Death on 19" Wheels
...no catastrophic engine failure ...yet
Grizzly is offline   Reply With Quote