Quote:
Originally Posted by LoneWolfGal
Jake Raby replied to my trouble ticket:
"Piper6909 in the thread is offering some good information. Usually when this scenario occurs the threads of the stud, or the nut have debris or burrs creating this instance. Heavy lubricants can also lead to this when applied to threads. With all the assistance on the thread you have what you need to move forward. The trick that LN advised may seem unorthodox, but it works and does so without any detrimental impacts."
Al, since I don't have a pneumatic zip gun, I'm going to try my powered ratchet and maybe the old-school impact hammer method you suggested. The crowfoot set and bench grinder won't be here until tomorrow anyway. I'm not sorry I bought them. You can't have too many tools. I plan to pick up the set of pass-thru sockets JFP recommended.
|
Do you have one of these?
https://www.lowes.com/pd/DEWALT-XR-20-volt-Max-1-4-in-Variable-Speed-Brushless-Cordless-Impact-Driver-Tool-only/5014298681?store=2687&cm_mmc=shp-_-c-_-vf-_-tol-_-ggl-_-PMAX_Dewalt-_-5014298681-_-local-_-0-_-0&gclsrc=aw.ds&&ds_a_cid=279391351&gad_source=1&gclid=Cj0KCQjwy46_BhDOARIsAIvmcwNxaIIOxZR30hD0S67m fmfKWaUf6bGqPde54zFC_eFBfk5xQ57T2b4aAq7VEALw_wcB
And a set of these?
https://www.lowes.com/pd/Kobalt-3-Pack-Socket-Adapter-Set/5014901757
If so, you have everything you need. If not, a ratchet and a hammer should work.