Hi
My 2002s originally was Specced with PSE. Whe I purchased car it had just a drone box on. However I have now fitted a original PSE rear box and want to reinstate the vaccum lines.
It's all there in engine compartment but not connected and vaccum line was blocked off.
This is older system without the button on dash so is just activated via speed and revs.
Dies anyone have a basic diagram of the direction of the vaccum lines.
The electric solenoid is there and the vacuum bottle. The line from engine is one blocked off.
I have attached photo and just need to know where the pipes fit in correct sequence.
I have attached the two valves on exhaust up through boot to the Y piece and then from Y piece through bulk head up to the rest of hoses.
If someone who has same system I'd appreciate even a drawn diagram of what hose fits where.
As photo my thinking is:
Red. to engine
Orange. to vaccum bottle
Yellow. to solenoid as it is
Green. to Y piece and split to both exhaust valves
Appreciate if anyone could confirm or correct me
Thanks
Thanks
