986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

OldManMo · 02-25-2022, 01:41 PM

The cams also had a thick (well less than 0.01mm) build up. Took a while and again by hand, though I did use a fine glass beads on shaft between the bearings and cams but they cam up nice

lifter carrier also came up nice though this had a lot of deposits at the bottom of the ultrasonic bath when cleaned. Still needs a little more work and polishing

02-25-2022, 01:41 PM	#77
OldManMo Registered User Join Date: May 2021 Location: Stansted Posts: 67	The cams also had a thick (well less than 0.01mm) build up. Took a while and again by hand, though I did use a fine glass beads on shaft between the bearings and cams but they cam up nice lifter carrier also came up nice though this had a lot of deposits at the bottom of the ultrasonic bath when cleaned. Still needs a little more work and polishing