986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

Stl-986 · 02-23-2022, 08:21 AM

try rotating the piece 45 deg & standing it up vertical to print. Should be able to print that as a single piece even with an Ender 3. May need need supports, but most likely not.

For ABS 20% infill should be more then good enough but I wouldn't go higher then 40%

02-23-2022, 08:21 AM	#20
Stl-986 Registered User Join Date: May 2017 Posts: 1,182	try rotating the piece 45 deg & standing it up vertical to print. Should be able to print that as a single piece even with an Ender 3. May need need supports, but most likely not. For ABS 20% infill should be more then good enough but I wouldn't go higher then 40% __________________ 2000 Boxster Tiptronic 2003 Boxster 2003 996 C2 Cab 2002 996 (SOLD) 1986 944 (gone but missed)